Sludge cutters can be used in the event of a break in the solid medium in any liquid to prevent pipe blockages or damage to downstream equipment. The sludge cutting machine cavity specially designed by OneOne Company can transport the solid material from the wastewater to the cutter disc, and then rotate the blade on it to hold the solid material and chop it.

Sludge cutters can be used in the event of a break in the solid medium in any liquid to prevent pipe blockages or damage to downstream equipment. The sludge cutting machine cavity specially designed by OneOne Company can transport the solid material from the wastewater to the cutter disc, and then rotate the blade on it to hold the solid material and chop it.

Sludge cutters can be used in the event of a break in the solid medium in any liquid to prevent pipe blockages or damage to downstream equipment. The sludge cutting machine cavity specially designed by OneOne Company can transport the solid material from the wastewater to the cutter disc, and then rotate the blade on it to hold the solid material and chop it.

Rubber protective sleeve*2, steel sleeve*2, pin*2, wear resistant short sleeve*4, cable tie*4,
1. To replace the pin, steel sleeve and skeleton, the whole pump needs to be disassembled, and the grease is required to lubricate the universal transmission parts during installation to ensure that the resistance of the transmission parts in operation is reduced, and the running effect is better.
2. The sealing ring and wire retaining ring can be installed in a fixed position to achieve the desired effect.
3. The material of steel sleeve and pin is generally tool steel material, which is lightly superior and stainless steel with hardness and damage.

Rubber protective sleeve*2, steel sleeve*2, pin*2, cable tie*2, fastening ring*2, O-ring*2
1. To replace the pin, steel sleeve and skeleton, the whole pump needs to be disassembled, and the grease is required to lubricate the universal transmission parts during installation to ensure that the resistance of the transmission parts in operation is reduced, and the running effect is better.
2. The sealing ring and wire retaining ring can be installed in a fixed position to achieve the desired effect.
3. The material of steel sleeve and pin is generally tool steel material, which is lightly superior and stainless steel with hardness and damage.

Rubber protective sleeve*2, steel sleeve*2, pin*2, fastening ring*2, wire retaining ring*2, O-ring*4
1. To replace the pin, steel sleeve and skeleton, the whole pump needs to be disassembled, and the grease is required to lubricate the universal transmission parts during installation to ensure that the resistance of the transmission parts in operation is reduced, and the running effect is better.
2. The sealing ring and wire retaining ring can be installed in a fixed position to achieve the desired effect.
3. The material of steel sleeve and pin is generally tool steel material, which is lightly superior and stainless steel with hardness and damage.

The transmission shaft is the output part connected to the geared motor, and the geared motor shaft is plug-in connection, which bears the operating load of the entire pump.

The transmission shaft is the output part connected to the geared motor, and the geared motor shaft is plug-in connection, which bears the operating load of the entire pump.

The transmission shaft is the output part connected to the geared motor, and the geared motor shaft is plug-in connection, which bears the operating load of the entire pump.

The coupling rod is the connecting part between the rotor and the transmission shaft, the coupling rod has two universal joints, which transmit power from the drive device to the rotor, and the two ends are respectively lined with alloy bushings to increase wear resistance and extend the service life of the pump, and there are cast steel, alloy steel, stainless steel materials are optional.

The coupling rod is the connecting part between the rotor and the transmission shaft, the coupling rod has two universal joints, which transmit power from the drive device to the rotor, and the two ends are respectively lined with alloy bushings to increase wear resistance and extend the service life of the pump, and there are cast steel, alloy steel, stainless steel materials are optional.

The coupling rod is the connecting part between the rotor and the transmission shaft, the coupling rod has two universal joints, which transmit power from the drive device to the rotor, and the two ends are respectively lined with alloy bushings to increase wear resistance and extend the service life of the pump, and there are cast steel, alloy steel, stainless steel materials are optional.

The standard construction is a single-acting, forward-reverse-rotating, wear-resistant mechanical seal. According to user requirements, different models of single/double acting mechanical seals, assembled and other special machine seals, and packing seals can also be used from different manufacturers.

The standard construction is a single-acting, forward-reverse-rotating, wear-resistant mechanical seal. According to user requirements, different models of single/double acting mechanical seals, assembled and other special machine seals, and packing seals can also be used from different manufacturers.

The standard construction is a single-acting, forward-reverse-rotating, wear-resistant mechanical seal. According to user requirements, different models of single/double acting mechanical seals, assembled and other special machine seals, and packing seals can also be used from different manufacturers.